Platen size: 60x80cm Temperature range: 0-300℃ Timer control: 0-999seconds Pressure: Adjustable Machine type: Pneumatic Voltage: 220V 1 phase, 220V 3 pase and 380V 3 phase
US$900-US$1000
Features
This single-station pneumatic heat press is mainly used for sublimation sportswear, canvas bags, or some large substrates, such as tents. It can individually transfer a small pattern to any position of the tent, because this The machine is open on three sides. Since its heating plate is 60x80cm and the power is 6KW, it has three voltages to choose from: 220V single-phase, 220V 3-phase or 380V 3-phase.
This single-station pneumatic heat press is mainly used for sublimation sportswear, canvas bags, or some large substrates, such as tents. It can individually transfer a small pattern to any position of the tent, because this The machine is open on three sides. Since its heating plate is 60x80cm and the power is 6KW, it has three voltages to choose from: 220V single-phase, 220V 3-phase or 380V 3-phase.
Integrated temperature and time counting panel, easy to operate. When the count reaches 9999 pieces, you can press the count reset button.
The heavy-duty frame can make sure that the frame will not shake no matter whether the heating plate is raised or pressed down during the operation of the machine.
The 6 springs are used to provide a buffering effect during the pressing process of the heating plate, making the pressing process more stable and smooth.
The machine is equipped with a tripod with wheels by default. After receiving the machine, you need to install the tripod and then place the main unit on the tripod. Wheels are installed to facilitate changes in the machine's position.
Although the machine has no visible cylinder, it is pneumatic because its cylinder is hidden. On the side of the machine, the pressure of the machine can be adjusted through the air pressure regulating valve.
Technical parameters
Heat transfer machine package
Heat press workshop
FAQ:
Q1: Is it pneumatic or electric?
A1: It is pneumatic.
A2: You need the 1.1 KW power and 50L capacity air compressor.
A3: Yes, you need to install the stand. And then put the main machine body on it.
Q4: How thick are the silicone pads which come with the machine?
A4: They are 1 cm thick.
Quality control for roll heat press
How to choose a suitable calander sublimation
How to maintain the roll heat press
Contact: Yina Liu
Phone: +8613424008477
Tel: +8613424008477
Email: info@hbheatpress.com
Add: No.1, Lane 1, Liuyang street, Baisha, Zhongluotan, Baiyun district, Guangzhou, China
We chat
