DTG machine spray pretreater

Features

This model can finish the spraying of treatment liquid, drying, pressing, and smoothing processes that are required for direct printing clothing. This equipment completes the station switching and spraying process by controlling the servo motor through a PLC and touch screen, and the related procedure can be chosen in accordance with various process requirements. If you run a significant DTG direct-to-garment production, it is your best option.

Digital touch screen control. 

3-phase power supply is needed for this pre-treat machine due to the total power is 11KW.

Adjustable spray start position and spray end position from 20mm to 500mm.

It can spray, dry and heat press in 1 cycle and 2 cycles.

Speed of the spraying motor is able to adjust volume that is applied to the light-color and dark-color shirts.

Side and top lids can be opened. It is easy to clean the spray box at the end of working day.

It has 2 working modes. Automatic mode and manual mode. When you choose the automatic mode, the user does not have to hit the foot switch. When it is manual mode, the user needs to use the foot pedal to control the rotation of the turntable.

The heating on and off of the heat press can be controlled separately when it is necessary. So it can be used as a single pretreatment machine and a single flash dryer.

Technical parameters

FAQ:

Q1: Is the spray flow volume adjustable?

A1: Yes, it is.

Q2: Which air compressor do I need for it?

A2: You need the 1.1 KW power and 50L capacity air compressor.

Q3: Do I need to install the machine when I receive it?

A3: Yes, you need to install the turntable.

Q4: How many spray nozzle does it have?

A4: It has 1 spray nozzle.

Q5: How many units of this DTG pretreatment heat press machine can be loaded into a 20 ft container?

A5: 4 units.

Q6: Can it work automatically?

A7: Yes, it can.